|Place of Origin:||CHINA|
|Model Number:||EFAME J108|
|Minimum Order Quantity:||1MT|
|Packaging Details:||180kg/iron drum, 14.4mt/20GP; 900kg/IBC, 18mt/20GP; 20mt/Flexibag, 22mt/20GP; 20mts ISO tank|
|Delivery Time:||Within 2 weeks after SC confirmed.|
|Payment Terms:||L/C; T/T; According to the needs of customers.|
|Application:||Substitute For DOTP, DOP, DBP, DINP|
1. Epoxy Fatty Acid Methyl Ester (EFAME) J108 Introduction
Plasticizing rate of EFAME J108 (0.9) is better than that of DOP (1.0). Great intermiscibility makes EPOXY FATTY ACID METHYL ESTER(EFAME) J108 is the best choice to cut production cost as a good substitute for DOTP, DOP, DBP, DINP, DEHP, TBC,DINCH, to replace 20%-40% portion and its price is only 70%~80% of the price of DOP, so greatly reduced the cost.
It is a new kind of plasticizer applicable to PVC and PVAC products. It is colorless and odorless transparent oil, liquid under normal temperature, made from natural plant oil. EFAME J108 Plasticizer passes the 6P & ROHS test from SGS test and conformed to the EU environmental standards.
Molecular Formula:C17~19 H32~36O3
Yeas of practical experience shows that J-108 could increase end product's flexibility, low-temperature performance, cold resistance and could make the color of product more vivid and softer.
It is well consistent with PVC resin, stable to light and heat, and volatilizes little.
2. Epoxy Fatty Acid Methyl Ester (EFAME) J108 Technical Data Sheet
Standard Item Grade One
Color Shade, (Pt- Co ) max 80
Acidity , mg KOH/g max 0.50
Epoxy Value, % min 4.6
Iodine Value % max 6.0
Flashing Point °C min 172
Density ( 20°C) g /cm3 0.925~0.945
Heat Loss % max 0.5
3. Epoxy Fatty Acid Methyl Ester (EFAME) J108 Property
1). Its higher flash point and high epoxy value, can increase the substitution quantity of the primary plasticizer, such as DOTP, DOP, DBP, DINP, DEHP, TBC,DINCH, to reduce the cost of the PVC products;
because when meets high temperature, the epoxy value will not be reduced more as for its higher epoxy value, so plasticizing rate will not be reduced, at the same time, it can increase the effective substitution portion, thereby to cut production cost.
also because of this higher flash point and high epoxy value, it can be used for high-end PVC soft products, especially wire and cable, foaming PVC leather, garment leather, etc;
because the higher flash point can reduce evaporation, which can avoid the explosion and combustion in the foaming tank during the PVC production process.
2). Its color can reach at 30#, so it has no effect to any kinds of transparent PVC products.
3). It has no odor, which guarantees that the finished products have no odor and there is not inoffensive odor in the workshop during rolling film and foaming production.
4. Epoxy Fatty Acid Methyl Ester (EFAME) J108 Application
Epoxy Fatty Acid Methyl Ester (EFAME) J108 can be applied to all PVC products, mainly used to produce high-quality PVC products,such as children toys, food package film, disposable PVC gloves, perfusion tube, medical pvc products, and also be applied to various kinds of plastic film, PVC sheet and artificial leather products, wire and cable coating granule, plastic gas pipe, rubber bar, heat shrink tube, textilene, PVC tube, PVC sole and gland strip, refrigerator seal, etc .
5. EPOXY FATTY ACID METHYL ESTER(EFAME) J108 Package & Storage
180kg/iron drum, 14.4mt/20GP
18mts ISO tank
It is stored in tightly closed container, in a cool, dry & ventilated area.
Shelf Life: Original characteristics remain intact for 12 months, if kept in recommended storage.
The MSDS can be provided on request.
6. Contact Us
An ISO 9001:2000 and ISO 14001:2004 company, REACH, 15P, RoHS, PAHs tests of SGS, www.pvc-auxiliary.com